Hi all,
I am trying to replace the old Obi 110 with Obi 212 in Taiwan. The following is my setup:
SP1: Google Voice
Line1: PSTN
PrimaryLine: PSTN Line
Line port DigitMap: (0xxxxxxxxx|xx.) as both landline and mobile numbers here are always 10 digits starting with 0
All other settings are factory default (device purchased in the US)
For some reason, the incoming calls from PSTN don't show caller ID at all (Showed "Caller ID hidden" in Chinese on the phone). All other caller IDs (outbound PSTN, inbound/outbound google voice) all worked fine. I checked the call history on Obi 212 and here is an example:
12:33:20 From LI1() To PH1
12:33:20 Ringing
12:33:53 Call Ended
As you can see, Obi 212 didn't catch any numbers from LI1. The old Obi 110 used the same settings worked just fine and I can see the numbers in the call history, so I am wondering what went wrong in Obi 212. Any advice and suggestions will be greatly appreciated. Many thanks.