1. The Firmware URL is: IF ( $FWV < 3.0.1.3741 ) FWU
http://www.obihai.com/firmware/OBi202-3-0-1-3741.fw2. Still set to Periodically
But...
Just looked and the firmware is now 3.2.2 (Build: 5921EX)
So it must have updated since I made the original post.
BTW Should the Interval still be left at 86400?
Gotta check my OBi200 to see if that one updated as well.
It's still at 3.2.2 (Build: 5898EX) so I will leave it there for now as it is working ok.
The Interval on the OBi200 is set as 0 and not 86400 as in the OBi202.
Should I leave the Interval on the OBi200 at 0 or set it at 86400?