News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

[newbie/Obi110] Dialing out with PHONE through LINE?

Started by Winfried, September 29, 2011, 08:19:44 AM

Previous topic - Next topic

Winfried

Hello,

As my first step using the Obi110, I simply connected a handset to the PHONE interface, the telco cable to the LINE interface, dialed out my cellphone (in France, so it's a ten-digit number eg. 0123456789)... and nothing happens.

I assume the defaults are for the US (or maybe the UK, since I bought the unit through Amazon UK), but have no idea what the dialplan means.

Here are the default in the Physical Interfaces section:
Quote
PHONE Port

DigitMap = ([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))

OutboundCallRoute   = {([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}   

CallReturnDigitMaps = {pli:(xx.)},{sp1:(<**1>xx.)},{sp2:(<**2>xx.)},{li:(<**8>xx.)},{pp:(<**9>xx.)}

LINE Port

DigitMap = (xxxxxxxS4|1xxxxxxxxxx|xx.)

InboundCallRoute = ph
Quote

What settings should I change? Is there a good tutorial about dialplans for the Obi110?

What is the difference between a (CallReturn)DigitMap, and In/OutboundCallRoute?

Thank you.

Winfried

It does ring my cellphone, but it takes a good 15s after I dial out "**8<cellphone>". Does someone have an idea why it's waiting for so long before playing the ringback tone and ringing my cellphone?

Here's the output in syslog, where "¤" is used to hide the digits dialed:
Quote
<7> [SLIC]:Slic#0 OFF HOOK
   192.168.0.14   29/09 17:56:21.640   
<7> [SLIC] CID to deliver: '(null)' (null)
   192.168.0.14   29/09 17:56:21.640   
<7> [CPT] --- FXS h/w tone generator (dial)---
   192.168.0.14   29/09 17:56:21.640   
<7> [DSP]: ---- H/W DTMF ON (level:1) : * @ 25950 ms----   192.168.0.14   29/09 17:56:25.437   
<7> [DSP]: ---- H/W DTMF OFF @ 26110 ms ----
   192.168.0.14   29/09 17:56:25.594   
<7> [DSP]: ---- H/W DTMF ON (level:1) : * @ 26320 ms----   192.168.0.14   29/09 17:56:25.812   
<7> [DSP]: ---- H/W DTMF OFF @ 26540 ms ----
   192.168.0.14   29/09 17:56:26.031   
<7> [DSP]: ---- H/W DTMF ON (level:1) : 8 @ 26820 ms----   192.168.0.14   29/09 17:56:26.312   
<7> [DSP]: ---- H/W DTMF OFF @ 27040 ms ----
   192.168.0.14   29/09 17:56:26.531   
<7> [DSP]: ---- H/W DTMF ON (level:1) : 0 @ 28610 ms----   192.168.0.14   29/09 17:56:28.094   
<7> [DSP]: ---- H/W DTMF OFF @ 28790 ms ----
   192.168.0.14   29/09 17:56:28.281   
<7> [DSP]: ---- H/W DTMF ON (level:1) : 6 @ 29050 ms----   192.168.0.14   29/09 17:56:28.531   
<7> [DSP]: ---- H/W DTMF OFF @ 29220 ms ----
   192.168.0.14   29/09 17:56:28.703   
<7> [DSP]: ---- H/W DTMF ON (level:1) : ¤ @ 29570 ms----   192.168.0.14   29/09 17:56:29.062   
<7> [DSP]: ---- H/W DTMF OFF @ 29750 ms ----
   192.168.0.14   29/09 17:56:29.234   
<7> [DSP]: ---- H/W DTMF ON (level:1) : ¤ @ 30030 ms----   192.168.0.14   29/09 17:56:29.515   
<7> [DSP]: ---- H/W DTMF OFF @ 30180 ms ----
   192.168.0.14   29/09 17:56:29.672   
<7> [DSP]: ---- H/W DTMF ON (level:1) : ¤ @ 30430 ms----   192.168.0.14   29/09 17:56:29.922   
<7> [DSP]: ---- H/W DTMF OFF @ 30590 ms ----
   192.168.0.14   29/09 17:56:30.078   
<7> [DSP]: ---- H/W DTMF ON (level:1) : ¤ @ 30860 ms----   192.168.0.14   29/09 17:56:30.344   
<7> [DSP]: ---- H/W DTMF OFF @ 30990 ms ----
   192.168.0.14   29/09 17:56:30.469   
<7> [DSP]: ---- H/W DTMF ON (level:1) : ¤ @ 31240 ms----   192.168.0.14   29/09 17:56:30.719   
<7> [DSP]: ---- H/W DTMF OFF @ 31410 ms ----
   192.168.0.14   29/09 17:56:30.890   
<7> [DSP]: ---- H/W DTMF ON (level:1) : ¤ @ 31670 ms----   192.168.0.14   29/09 17:56:31.156   
<7> [DSP]: ---- H/W DTMF OFF @ 31850 ms ----
   192.168.0.14   29/09 17:56:31.328   
<7> [DSP]: ---- H/W DTMF ON (level:1) : ¤ @ 32070 ms----   192.168.0.14   29/09 17:56:31.562   
<7> [DSP]: ---- H/W DTMF OFF @ 32260 ms ----
   192.168.0.14   29/09 17:56:31.750   
<7> [DSP]: ---- H/W DTMF ON (level:1) : ¤ @ 32470 ms----   192.168.0.14   29/09 17:56:31.953   
<7> [DSP]: ---- H/W DTMF OFF @ 32720 ms ----
   192.168.0.14   29/09 17:56:32.203   
<7> [DAA]: FXO OFFHOOK
   192.168.0.14   29/09 17:56:42.219   
<7> [DAA]: detecting disconnect tone, reinit: 1
   192.168.0.14   29/09 17:56:42.219   
<7> [CPT] --- FXO s/w tone generator (0) ---
   192.168.0.14   29/09 17:56:42.703   
<7> [CPT] --- FXO s/w tone generator (6) ---
   192.168.0.14   29/09 17:56:43.109   
<7> [DSP]  ---- S/W DTMF ON (level: 3) : 6, @ 43731 ----   192.168.0.14   29/09 17:56:43.219   
<7> [DSP]  ---- S/W DTMF OFF @ 43802 ms----
   192.168.0.14   29/09 17:56:43.281   
<7> [CPT] --- FXO s/w tone generator (2) ---
   192.168.0.14   29/09 17:56:43.515   
<7> [CPT] --- FXO s/w tone generator (8) ---
   192.168.0.14   29/09 17:56:43.906   
<7> [CPT] --- FXO s/w tone generator (0) ---
   192.168.0.14   29/09 17:56:44.312   
<7> [CPT] --- FXO s/w tone generator (5) ---
   192.168.0.14   29/09 17:56:44.703   
<7> [CPT] --- FXO s/w tone generator (7) ---
   192.168.0.14   29/09 17:56:45.109   
<7> [CPT] --- FXO s/w tone generator (4) ---
   192.168.0.14   29/09 17:56:45.515   
<7> [CPT] --- FXO s/w tone generator (7) ---
   192.168.0.14   29/09 17:56:45.906   
<7> [CPT] --- FXO s/w tone generator (3) ---
   192.168.0.14   29/09 17:56:46.312   
<7> FXO:OutboundRinging
   192.168.0.14   29/09 17:56:46.515   
<7> [CPT] --- FXS h/w tone generator (ringback)---
   192.168.0.14   29/09 17:56:46.515   
<7> FXO:OutboundConnected
   192.168.0.14   29/09 17:56:48.515   
<7> [SLIC]:Slic#0 ONHOOK
   192.168.0.14   29/09 17:56:58.719   
<7> [SLIC] CID to deliver: '(null)' (null)
   192.168.0.14   29/09 17:56:58.719   
<7> [DAA]: FXO ONHOOK MONITOR
   192.168.0.14   29/09 17:56:58.719   

Thank you.

Winfried

What happens is that it first waits for about 10s after I type the cellphone number, then dials out, plays some ringback tone, then says "Outbound connected", waits a few seconds, then I hear some different ringback tone, and my cellphone finally rings.

Hitting the # key after dialing the number speeds things up a bit, so I guess the first wait it due to the Obi timing out.