News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Obi202 Voice Bridge 4 Polycom vvx250 & GV

Started by Scunizi, May 20, 2020, 08:50:16 AM

Previous topic - Next topic

Scunizi

I'm trying to connect/register my Polycom vvx250 to an Obi202 via a voice service bridge on SP4.  It should bridge to SP1 which is where my google voice is connected. I've been following the instructions based on this (http://web.archive.org/web/20160317011451/http://www.obihai.com/docs/OBi-VoIP-Device-Attach-Legacy-IP-Phone-Workbook-v1-0.pdf).

All mods are done in the Obi locally.  I have been unsuccessful getting the Polycom to register to the OBI.  If there is a way to register my GV # direct to the Polycom that would be ok too.  However, my GV account is a personal one and not connected to Google Apps.

My google FU is failing me.  Any advice is appreciated.

drgeoff

Quote from: Scunizi on May 20, 2020, 08:50:16 AM
I'm trying to connect/register my Polycom vvx250 to an Obi202 via a voice service bridge on SP4.  It should bridge to SP1 which is where my google voice is connected. I've been following the instructions based on this (http://web.archive.org/web/20160317011451/http://www.obihai.com/docs/OBi-VoIP-Device-Attach-Legacy-IP-Phone-Workbook-v1-0.pdf).

All mods are done in the Obi locally.  I have been unsuccessful getting the Polycom to register to the OBI.  If there is a way to register my GV # direct to the Polycom that would be ok too.  However, my GV account is a personal one and not connected to Google Apps.

My google FU is failing me.  Any advice is appreciated.
There have been a few threads about that problem.  It is not specific to Polycom phones.

Since a few years ado there is a bug in the OBi firmware which prevents some phones being able to register to it.  (It used to work OK.)  Can your IP phone be set to make calls even when not registered?

Use Google with

Site:obitalk.com azrobert register bug

in the search box for more info.