After calling a non-working number, can't make new calls

Started by magicwine, November 11, 2020, 01:58:03 PM

Previous topic - Next topic


Something strange happened a day or two back.

Using GV, after calling a non-working number, every new number after that receives the same can't connect the call message.

It took me some time to realize it was the non-working number causing this, and not the obi 200 device directly.

I need to unplug the device, then reconnect it.

If I dial a good number first, no problems. But if I dial the non-working number again, every call to a good number after that again gets a failed recording as did the initial bad number call.

Anyway to fix this other than having to unplug the device?