RonR,
Thanks to your help, my dial plan was working good. I wanted to set up your single stage method (
http://www.obitalk.com/forum/index.php?topic=1103.0).This is my obitalk inboundcall settings :
{(Mcot)>(Mli):li},{(Mcot)>(<*1:>(Msp1)):sp1},{(Mcot)>(<*2:>(Msp2)):sp2},{(Mcot)>(<*3:>(Mvg3)):vg3},{(Mcot)>(<*8:>(Mli)):li},{(Mcot)>(<*9:>(Mpp)):pp},{(Mcot)>(<**1:>(Msp1)):sp1},{(Mcot)>(<**2:>(Msp2)):sp2},{(Mcot)>(<**3:>(Mvg3)):vg3},{(Mcot)>(<**8:>(Mli)):li},{(Mcot)>(<**9:>(Mpp)):pp},{(Mcot):aa},{ph}
I've also followed other steps (changing digitmap and inboundcall route in Phone and Auto attendant, creating new user defined digitmaps etc...)
Since then, if I dial 00919xx. to call indian mobile, my calls are routed through PSTN line instead of SP1.
My line port digitmap is : (<**1>00919xx.|<**1>0097xx.|xx.)
I don't know if I have to change anything. Thanks for your help