I'm trying to set up my OBi110 to bridge software phones such as MicroSIP or Phoner to a POTS line. I have it working, but there are a few little things I would like to get ironed out.
I'm currently using Phoner on my PC, and I would like to be able to 'pick up' on an active call on the POTS phone line, but I can't do that at the moment. If its possible without a pbx server I would like to use multiple PCs as handsets on the same line too, so I'm hoping there's a setting to enable this.
Now for a phone connected to the phone port, I would like to bridge that to the line port as soon as the phone is 'picked up' or off the hook so I don't have the delay when dialing numbers. I don't need to call any of the PCs, they should all act as handsets for the POTS line.
here's the obi110 Configuration I'm currently using:
ITSP Profile B > SIP > ProxyServer > 127.0.0.1
ITSP Profile B > SIP > X_SpoofCallerID > Checked
SP2 Service > X_ServProvProfile > B
SP2 Service > X_InboundCallRoute > {line1:li},{ph}
SP2 Service > X_RegisterEnable > UnChecked
SP2 Service > AuthUserName > line1
SP2 Service > AuthPassword > (blank)
LINE Port > InboundCallRoute > ph,sp2(0@192.168.2.108:5060)