Quote from: drgeoff on April 26, 2021, 12:46:01 PM
Does dialling
**9123456789*cell number
on the 2182 ring the cellphone or the 212 phone?
Neither. It doesn't carry the numbers through to dial on the 212 outside line
And I'm not sure about that workaround. It doesn't seem consistent. Might be dialing too soon after reboots.
Okay, not sure why it was going to phone before, unless as I mentioned I was testing too quickly after a reboot, routes not fully functional yet and just dumped the incoming to ph.
If I dial
**123456789 by itself, add my cell after, or add * plus my cell number, they all go to 212 Line dialtone
(I removed my previous post about a possible workaround)
I can live with getting a dialtone when calling from 2182 to 212. 2-stage dialing can hide in the speed dials. But how would I then call that handset on the 212 as makeshift intercom between units?
Is this where we need to send the 8* from 2182 and have the 212 match it before sending to line? We haven't been able to make that work yet