Thanks for your help azrobert!
Results:
Speed Dialed Calls:
sp1(18005551212) = SIT Tone followed by "Rejected by Service Provider, Reason 503"
sp2(18005551212) = "The number you have reached has been disconnected" Apparently worked.
Also tried a call to different 800 number, sp1(18003569377) and it worked.
sp1(316xxxxxxx) = Worked
sp2(316xxxxxxx) = Worked
Dialed Calls to: **1xxx-xxxx = "There is no service available to complete your call"
**2xxx-xxxx = "No Service Configured Error - Please login to
Obitalk.com and configure your device"
As you suggested, I believe I have a routing problem.
Please take a look at these and tell me what I managed to screw up.
DigitMap=([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**9(Mpp)|(Mpli))
On Outbound calls, my desire is to route all outbound calls, except for 911 & 933, via Sp2 with
the ability to use sp1 by dialing the **1 if needed. The 911 & 933 calls route to sp1
Outbound Call Route,=({911:sp1},{933:sp1},{([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**9(Mpp)|(Mpli))}