July 31, 2021, 01:16:46 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: "The number you dialed has not received a response from the service provider"??  (Read 11215 times)
Pedro675
Full Member
***
Posts: 89


« on: June 11, 2021, 11:28:08 am »

Did a Goggle search but found nothing useful.

Our phone is basically dead, cannot receive incoming except for the caller to leave voice message. No outgoing calls and the above message. We have a dial tone. This has happened before but usually fixed with "unplug OBi device, reconnect OBi device". Just changed Goggle password, but can't see how that matters?

Can anyone help I am stumped. Please answer with known solutions, not guesses as I found on all Goggle search for same issue.

Thanks,
Peter
Logged
EricEastCoast
Newbie
*
Posts: 3


« Reply #1 on: June 11, 2021, 08:13:17 pm »

Same here. I tried deleting my OBi200 device from both OBiTALK and Google Voice in an attempt to reset it.  I added the device back but when I configure SP1 for Google Voice, the OBi200 device does not get added back to my device list in Google Voice, even though it goes through all the steps of me selecting my google account.  In OBiTALK, on my Dashboard it says "Registration Not Required".  When I try to call out, I get this audio message:

"The number you dialed has not received a response from the service provider."

Logged
SteveInWA
Hero Member & Beta Tester
*****
Posts: 6354



« Reply #2 on: June 11, 2021, 09:12:30 pm »

All you needed to do was to read today's posts.  It's being worked.  No need for yet another thread.

http://www.obitalk.com/forum/index.php?topic=18329.msg108653#msg108653
Logged

EricEastCoast
Newbie
*
Posts: 3


« Reply #3 on: June 12, 2021, 06:31:29 am »

Thank you.
Logged
Mddd
Newbie
*
Posts: 11


« Reply #4 on: June 12, 2021, 09:33:13 am »

Steve
Still getting failure with GV and obi
Logged
Marc4866
Newbie
*
Posts: 12


« Reply #5 on: June 12, 2021, 12:43:52 pm »

I should have checked here first...as opposed to just checking if GV was "UP".....  After doing a Hard Reset of the 202, and starting from somewhat scratch..... and still finding the same issue... I only noticed the issue today, the 12th... But it appears this is ongoing from yesterday.....  AAAArrGGHHHHHHH!
Logged
Lostdog
Newbie
*
Posts: 14


« Reply #6 on: June 13, 2021, 11:57:56 am »

This information should be pinned in clear language.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Advertisement
Advertisement