I discovered today that my phone attached to Obi200 does not ring but makes a short sound like, "do,doda-lo" and then immediately gives the busy signal. This is on SP2 on a
voip.ms DID. Making outbound calls still works well.
From looking at call history, it looks like this problem (no inbound calls) started on 11/30-12/1. Previously, inbound and outbound calls have been working well for years.
Phone port status voltages appear as listed in forum posts for on hook and off hook. Dialing ***9 1 does report the IP address. X_InboundCallRoute ends with {ph}
Device is registered/connected at ObiTalk and registered at
voip.ms.
Any advice on determining the error it is having or how to troubleshoot/resolve this problem?
Thank you for any and all help.