GV Outbound Calls After EOL

[azrobert]

Can't seem to break it.

If you have the Bookmark Bar enabled and have GV warning "Your browser might prevent calls from ringing" do this:
Reduce the width of the window until the warning message expands to 3 lines. Keep the window height at max. The script will now fail. Adding "&parm4=100" will fix this.

Zoom 250% will also cause the script to fail.

AHK will not detect a window title when there is a 2nd tab and it's active. In this scenario the script will open another GV window and complete the call. I haven't researched why it doesn't detect the window.

[Taoman]

If you have the Bookmark Bar enabled and have GV warning "Your browser might prevent calls from ringing" do this:
Reduce the width of the window until the warning message expands to 3 lines. Keep the window height at max. The script will now fail. Adding "&parm4=100" will fix this.

I've always had the Bookmark Bar enabled but have never seen that error/warning message before. But I take your point about how parm4 would be used.

PS.
From the time I dial the number and then hear the dial tone it takes 6.5 seconds until my Callcentric extension starts ringing. Pretty damn fast.

[azrobert]

I have an updated GV_Server and have a new version.

I made a change in Chrome settings and the script started failing, so I fixed the code again. I also created a more stable version 2. The old script repositions the cursor, so it takes 1 tab to the outbound number field and then enters the number. I explained in a previous post why this target area changes based on different settings.

The new version takes a different approach. It enters the full GV URL which contains the outbound number. Selecting the Forwarding Number is the only thing left for the script to do. This is basically the same as the old script when it doesn't find a GV window. I originally didn't use this method because it takes about 2 seconds longer to receive the callback.

If the old script works, you can continue using it. If it doesn't work, try the new V2. The updated old version and the instructions are found at the link below. The OBi forum only allows 4 attachments per post, so I attached the new GV_Server_V2 here.

https://www.obitalk.com/forum/index.php?msg=112105

[Taoman]

Very cool.
FYI: the ahk script works fine for me but the exe does nothing. It executes and I can see that it loaded (alongside my personal ahk script) but when I make a call nothing happens.*
Edit: so while I was writing this post I still had the exe loaded. I just now exited the exe and loaded the new ahk script and the script immediately started completing the call I had tried to make with the exe. It completed the call with no issues.

Also, how hard would it be to just hardcode in my forwarding number or is that even possible? The more I think about I'm guessing it's not possible......

* I compiled the working version 2 ahk script but still no joy with the exe.

PS. Nice touch.

if (Winfound != "Y")
   WinClose, Voice

[azrobert]

GV_Server.exc and GV_Server_v2.exe both work for me.

Did you allow it access thru the firewall?

Go to:
Windows Security.
Firewall & network protection
Allow an app through firewall

Is GV_Server.exe checked?

I thought that there might be a way to pass the forwarding number with the URL, but I couldn't find anything. I even posted a question on the GV forum and they said it can't be done.

[Taoman]

Did you allow it access thru the firewall?

Yeah, that was it. Thanks.

[Pnay]

Why is this necessary? Won't Google Voice on Obi still work for outbound and inbound after EOL until Google breaks something?

[azrobert]

Here is a Batch file you can use to trigger GV_Server. Double clicking on it will open a terminal window and ask for a phone number. It will prompt for another number after triggering GV_Server. Close the window to stop it. It's setup to use the 1st forwarding number. If you need a different number, edit the Batch file and change parm2 to the number you need. It uses the Chrome browser. This can easily be changed. It also doesn't have any error checking, so enter the phone number correctly.

The Batch file opens another browser window for the URL. If you want to automatically close the window, add the following code to near the end of GV_Server and before "res.status := 200".

Code Select Expand

if WinExist("Untitled")                  ; GV-Server triggered by BAT file?
  WinClose

You can optionally pin the Batch file to the Start menu:
Right click on the Batch file and select Create Shortcut
Right click on the Shortcut and copy or cut it
Right click on the Start button and select Run
Enter shell:programs
This will open the Programs folder
Paste the shortcut into the folder
Now the shortcut will show as a Start menu program
Click Start button
Window 10: scroll down to the shortcut
Windows 11: Click All apps then scroll down to shortcut
Right click on shortcut and select Pin to Start

GV_Server can be pinned to Start using the same procedure.

[Taoman]

I just run the compiled versions of your script and my script at startup.
My guess is that most users that would be running your script regularly would want to do the same.

But I can test it if you want me to.

[Taoman]

Why is this necessary? Won't Google Voice on Obi still work for outbound and inbound after EOL until Google breaks something?

Correct. But don't you think it's prudent to have an alternate solution already tested and in place?

You should try azrobert's script (if you have a Callentric $1/month DID). It is quite slick. And the edit you would need to make on your OBi won't interfere with your existing configuration.

[azrobert]

But I can test it if you want me to.

You don't have to test the batch file. I know it works. I had nothing to do one afternoon and came up with the idea. The original version only had 2 lines of code. I added a loop, so you don't have to start it every time you make a call. The rational was that you basically need an OBi device to run GV_Server. The only other way I know to generate a URL with parms is with SipSorcery and probably FreePBX/Asterisk. These are both overkill. The batch file can be used with any ATA.

[NKYadav]

A lot of reading and figuring out how I want to provision my pair of Obi200s due to the upcoming EoL.

Thank you @azrobat for all the hard work you've been putting into these scripts to make this so much easier to manage, I was about to go crazy trying to figure out how I would be able to locally manage these as at least one is not going to be in my own home to begin with.

If the current set up on that device ever breaks, I like having this as a backup, as Taoman mentions.