News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Sip uri for Lenny?

Started by dircom, November 26, 2022, 08:11:36 AM

Previous topic - Next topic

dircom

Does anyone have a sip uri for "Lenny"?  trying to send my spam callers from my voip.ms account to Lenny without using a phone number.
TIA



dircom

thanks, both of those tested and work!

Taoman

Quote from: drgeoff on November 26, 2022, 08:57:53 AM53669@lenny.from-nv.com

Can you guys get this SIP URI to work from a speed dial? When I try, it literally reboots my OBi. I have dozens of other SIP URIs that work just fine.

It also works fine in a Callcentric call treatment.

dircom

#5
Using VOIP.ms I put the sip in my phonebook, with a speed dial#
Made a caller id filter so when my cell phone called it would go to the speed dial and it works fine.

Taoman

Quote from: dircom on November 26, 2022, 03:49:11 PMUsing VOIP.ms I put the sip in my phonebook, with a speed dial#
Made a caller id filter so when my cell phone called it would go to the speed dial and it works fine.

Thanks, that works for me also.

I was specifically wondering about a speed dial on an OBi20x device.

azrobert

Quote from: Taoman on November 26, 2022, 04:20:19 PMI was specifically wondering about a speed dial on an OBi20x device.

You need a valid callerid:
sp4(13475147296@in.callcentric.com;ui=6235941000)

If that doesn't work, try modifying a working speed dial number.

Taoman

Quote from: azrobert on November 27, 2022, 06:18:19 AMYou need a valid callerid:
sp4(13475147296@in.callcentric.com;ui=6235941000)

If that doesn't work, try modifying a working speed dial number.

Yep, that worked. Thanks.

Could you try putting 53669@lenny.from-nv.com in a speed dial and see what happens?
It literally restarts my OBi202 every single time I try and run that speed dial which is blowing my mind.

drgeoff

Quote from: Taoman on November 27, 2022, 12:19:16 PMCould you try putting 53669@lenny.from-nv.com in a speed dial and see what happens?
It literally restarts my OBi202 every single time I try and run that speed dial which is blowing my mind.
In my case, using 53669@lenny.from-nv.com is normally an extension on my FreePBX.  However ad a test I have tried that as a speed dial on my Obi110.  Worked fine.

dircom

using VOIP.ms, I was thinking there was not a charge to fwd to sip uri's but I guess it's the same charge as to a phone #

Does anyone have the number for the PSYCHO HOTLINE?  it used to be 218-488-1302

Taoman

Quote from: dircom on November 27, 2022, 02:01:34 PMusing VOIP.ms, I was thinking there was not a charge to fwd to sip uri's but I guess it's the same charge as to a phone #
There is no charge to call a SIP URI but if you're forwarding to a SIP URI from an incoming PSTN call then you're still going to be charged for the incoming PSTN call.

Quote from: dircomDoes anyone have the number for the PSYCHO HOTLINE?  it used to be 218-488-1302
Can't seem to find one.

You might like:
You're not the next caller! fun@getonsip.com
or
BeverlyBot 8285497069  Note: Beverly's not the friendliest person around ;)

Taoman

Quote from: drgeoff on November 27, 2022, 01:45:47 PMIn my case, using 53669@lenny.from-nv.com is normally an extension on my FreePBX.  However ad a test I have tried that as a speed dial on my Obi110.  Worked fine.

Thanks for testing. Guess it's just me. If I get motivated I'll haul out one of my other OBi devices and try it on that.

Taoman

Quote from: azrobert on November 27, 2022, 06:18:19 AMYou need a valid callerid:
sp4(13475147296@in.callcentric.com;ui=6235941000)


This still working for you as a speed dial? Stopped working for me as a speed dial and in a Callcentric call treatment. Others saying the same thing. Getting a 503 SIP error code.

But, it's still working for me when used at voip.ms. Go figure.

azrobert

Also fails for me.

It works if you register to Callcentric and call the Lenny number.