On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT
Started by ChrisM, December 02, 2011, 08:08:21 AM
Quote from: MrGadget on December 12, 2011, 12:49:27 PMCan we expand how this works?I assume the syntax in Location2:PI:PP:DM containing the "<2*>(Mpli)" tells the Obi to prepend "2*" to call the Location1 (based upon the Speed Dial 2# settings). If not, how do ALL Calls get routed to Location1?
Quote from: MrGadget on December 12, 2011, 12:49:27 PMTo help understand this, and to expand the functionality, it would be nice to see some additional examples based upon this configuration. So, perhaps expanding the complexity may help others understand how to make routing of calls to other Locations.Example for routing calls to other locations.From Location2:All Service Calls use LOCAL LINE port ([2-9]11)All 7-digit calls use LOCAL LINE portAll Area Codes in (List-1) use LOCAL LINE portAll Area Codes in (List-2) use LOCATION1 LINE portAll Area Codes in (List-3) use LOCATION3 LINE port (extra credit design, TBD)All 18xx calls use LOCATION1 LINE portAll CALLS NOT listed above, Use Service Provider1 (yet to be configured GV)List-1: (404|202|650)List-2: (408|719|720)List-3: (212|407|666)I assume this type of complexity could be created. But what about when you have more than 2 Obi Units? Do you need to setup Gateways and Trunks to help define where the traffic will flow? If you could provide the commands for the above scenario, it may help understand the call process flow.
Quote from: MrGadget on December 12, 2011, 12:49:27 PMWhere is the best place to find information pertaining to the hierarchy of these devices, in addition to the Obihai Admin Guide. Do the O'Reilly books have anything of use? How "standard" are these commands for other ATA devices?
Quote from: FrankHaynes on December 12, 2011, 07:13:44 PMThis is really good and useful info, which is why this is SCREAMING for a wiki to make it easier to index and keep it from scrolling off into posterity.
QuoteExample for routing calls to other locations.From Location2:...All CALLS NOT listed above, Use Service Provider1 (yet to be configured GV)
Quote from: MrGadget on December 23, 2011, 08:37:19 AMQuoteExample for routing calls to other locations.From Location2:...All CALLS NOT listed above, Use Service Provider1 (yet to be configured GV)Ooops. Sorry. I should have stated that GV would be setup at Location1 using SP1 (I thought it, but didn't state it). Is this possible, or does Location2 need to have an account with GV also? I would like to route through one GV account, if possible.