How to configure OBI100 to connect to NETTALK service

[KC512]

Can you tell me how to configure my OBI100 to connect to the NETTALK service?  I want to get rid of the NETTALK device and configure the OBI100 to use both the NETTALK and GVoice services.
Thank you.

[jimates]

I found some old info here   http://www.magicjacksupport.com/nettalk-duo-sip-a-tutorial-t10249.html

Since you have NetTalk you can probably get more info from their site or from their CS.

[KC512]

Thank you for the response.  Even though I was hoping to use both Nettalk and GVoice from the OBI100, I might try what you propose...forwarding my Nettalk calls to GVoice and using the Obi for GVoice.
Thanks again.

[jimates]

see my edited post

I also found this which probably contains all the info needed for configuration as a sip account.
http://www.notoll.com/dialer/nettalkdialer.pdf

[KC512]

After reading through this, my only concern is that it voids my duo.  I'll have to think about this and I may contact Nettalk customer support first to see what they have to say on this subject.
Thank you very much for the great info.