On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Power light blinking, no IP

Started by 0biUser5959, May 12, 2012, 12:28:21 PM

Previous topic - Next topic


Power light Flashing Green: The OBi is looking for a DHCP IP address.

Try putting the OBi202 into 100 Mb full duplex Ethernet mode.

Then reboot your router.


I know this is an old thread, but I wanted to add another recovery option for those like me who tried everything in this thread (hard reset, different power supply, etc.) but still had a bricked Obi.

What did work for me was updating the firmware as described here:

If you've tried everything else, this might get your device working again.