I'm able to access the obitalks IP address but not by using ***1 ( I found the IP address through my router). Anytime I dial anything out, the echo test # or the # given when adding the device, I get a busy signal. I hear a dial tone but that's about as good as it gets. I'm able to ping it as well.
C:\Users\GoodBoy>ping
http://192.168.1.117/Ping request could not find host
http://192.168.1.117/. Please check the name an
d try again.
C:\Users\GoodBoy>ping 192.168.1.117
Pinging 192.168.1.117 with 32 bytes of data:
Reply from 192.168.1.117: bytes=32 time=2ms TTL=80
Reply from 192.168.1.117: bytes=32 time=1ms TTL=80
Reply from 192.168.1.117: bytes=32 time=1ms TTL=80
Reply from 192.168.1.117: bytes=32 time=1ms TTL=80
Ping statistics for 192.168.1.117:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 2ms, Average = 1ms