On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT
Started by QBZappy, December 02, 2010, 10:25:46 PM
Quote from: MarkObihai on April 29, 2014, 07:56:41 AMOne of our OBi users in Australia has written an excellent tutorial on digit maps - "OBi Digitmaps Unravelled" - that I have attached to this post.Thunderbird1 has been a regular contributor on the Australian Whirlpool forum in the discussion thread on the OBi202, found here:http://forums.whirlpool.net.au/forum-replies.cfm?t=2215053
Quote from: ianobi on December 16, 2015, 03:57:21 AMAssuming that sp1 is your Primary Line, then:Service Providers > ITSP Profile A > General > DigitMap:(<**2>011xx.S3|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)...
Quote from: CaliBoy on January 29, 2016, 11:15:50 AMCan anyone please give me the Digit Map settings which can prepend Raza.com access number when I dial long distance number? Please note that there is a 4-5 sec pause required after dialing Access Number in order for Raza.com to verify account details
Quote from: ianobi on April 27, 2013, 11:43:42 AMI see how you are thinking. Lucky Patcher Kodi The rule you would need is:|<#:1847478>xxxx|Let's try to keep it simple. Using the digit map as I proposed, if you dial four digits followed by # then the rule |<1847478>xxxxS4| would be processed instantly.Dialling # after any number of digits forces the interdigit timer to 0 and instantly executes the rule. So if your In-Laws are ok with that, then it's simple and can be applied to any number - four digits, seven digits etc. I suggest leaving the S4 in place in case they forget to dial the # at the end of the number.