Quote from: QBZappy on July 18, 2012, 12:23:36 PM
Two places to check:
1) System Management->Network Settings->Time Service Settings->NTPServer1
= Choose Default setting
2) System Management->Network Settings->Time Service Settings->LocalTimeZone
= Choose your location
More than likely you are making changes in the unit and the Expert tool in the OBi portal is configured to provision the settings to the unit (over ride the unit). Either make your changes in the portal or disable the auto provisioning setting in the OBi and make your changes there.
Read this to understand
Managing Your OBi Device Configuration: OBiTALK or OBi Web Page but NOT Both
http://www.obitalk.com/forum/index.php?topic=92.0
Thank you for a quick reply.
I think I've already tried those setting, without results.
I am unable to figure out how to use the 'attach' function in the forum (says "uploader full, contact admin" for a 55KB file!). Anyway, the NTPServer1 is set to default, and LocalTimeZone is 'Central'.
Yes, I read the document and I familiarized myself with 'expert settings'. May be I am missing something?
Anyway, it also says "If you disable auto-provisioning, you will not be able to manage your OBi devices remotely." I do wish to retain remote configuration ability.
PS: Hope I find a better solution. For now, I have disabled 'Autoprovisioning' and reset the date on the device. Hope this works.