On an OBi202 running 3.0.0 (Build: 3184M), I'm using Anveo on SP1 as Primary Line, but trying to route toll-free calls via Alcazar Networks.
Voice Gateway 1 is set up with:
AccessNumber: SP1(tollfree.alcazarnetworks.com;op=ns)
AuthUserID: (11-digit calling number)
AuthPassword: xxx
The OuboundCallRoute for the Phone 1 port contains:
...,{(1(800|855|866|877|888)[2-9]xxxxxx):vg1},...
When I dial e.g. 18004377950, the number sent to Alcazar Networks (as verified by Call History and by SIP Debug) is 1800437795, so the call fails with a 404 error.
I suspect that this is a field width problem, because there is no trouble if either the IP address (of
tollfree.alcazarnetworks.com) or a shorter name (of another provider) is used instead of the long name.