Obi110 SP2(GV) POTS dial out

[Letzmailpatel]

Have a Obi110 with 2 GV number on SP1 and SP2 and POTS line connected

all seems to work as line port is set to SP2(2222222222).


QUESTION IS, can i call in my SP2 GV number (2222222222) and tunnel thru POTS,  so I can use POTS dial plan package. This way i can use POTS service and people i call from can see my POTS number instead of GV SP2 number.


SP1 (1111111111)
SP2 (2222222222)
POTS (1234567890)

all setup in OBI110

I would like to call SP2, get AA or just get POTS dial tone to dial out from and receiving end would see POTS number.  Hope my question is clear and would love to see a solution.

Thanks

[ianobi]

The question is where are you dialling from? Let us say you dial your gv number on sp2 from your cell phone number 12345678912.

From the Obi Dashboard go to "Trusted Callers" input 12345678912 and check the "match" box. Press "Save Changes" button, wait for Obi to reboot. This will add (12345678912):aa to all of your InboundCallRoutes.

If you only wish to to access aa from calls coming into sp2 then do this:

Voice Services -> SP2 Service -> X_InboundCallRoute:

{(12345678912):aa},{ph}

For easy dialling onto PSTN ensure this:

Auto Attendant > Primary Line > PSTN

[jimates]

I assume that since you want your pots number to show as the caller id you don't receive calls on your google voice sp2.

If that is the case you can set your google voice to show it's own number instead of the number of the actual incoming call. So with every incoming call showing your google voice number and that number in your trusted caller list, you can call your google voice number from any number and get the AA.