News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Obi202: Manual configure IP, DNS, GV, SIP server

Started by 0815dela, November 10, 2012, 09:06:38 PM

Previous topic - Next topic

0815dela

Trying to configure GV on SP1 and then use SP2 as SIP server so I can connect a sip phone to GV via Obi.

Having some trouble with this.
1. Where can a static IP be set in bridge mode? There does not seem to be an option. Do I have to set a dhcp reservation on my router via MAC address?

2. SP1 (GV) Service Status says "Resolving DNS"

3. SIP Phone cannot connect

Here is my config: http://www.filedropper.com/config_8

QBZappy

#1
Quote from: 0815dela on November 10, 2012, 09:06:38 PM
Trying to configure GV on SP1 and then use SP2 as SIP server so I can connect a sip phone to GV via Obi.

1. Where can a static IP be set in bridge mode? There does not seem to be an option. Do I have to set a dhcp reservation on my router via MAC address?

2. SP1 (GV) Service Status says "Resolving DNS"

3. SIP Phone cannot connect

1. "dhcp reservation on my router via MAC address", should work.

2. In bridge mode I don't think you need a DNS entry in the OBi. Your router should provide for this.

3. From your PDF I see, {SP2@1001@local_client} I think "local_client" should be ip of the sip client (phone).
Owner of the 1st OBi110/100 units in service in Canada & South America. 1st OBi202 on my street. 1st OBi1032 in Montreal.