On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT
Started by ShermanObi, March 23, 2011, 12:02:48 AM
Quote from: Dale on October 26, 2011, 01:30:57 PMBut, take the "AddressingType" setting for example... in the direct access UI there are two choices: StaticDHCPFor this parameter, there is nowhere in the ObiExpert UI that I have found where this choice can be made. It now displays the value, but no change can be made.
Quote from: ShermanObi on October 25, 2011, 06:15:46 PM@Dale: Since you asked so nicely, the following status items have been added to the OBiTALK expert web pages:Status System Status Call Status Last 10 Calls SP1 & SP2 Stats PHONE & LINE StatusTo see this information, your device will need to be up-to-date with 1.3 software.On overwriting items, the OBi Expert configuration will be used when both the OBiTALK and Default settings check boxes are left UN-checked. Parameters set by direct web access to the device's IP address (***1) will be overwritten by the OBi Expert setting if that parameter's OBi Expert setting has the OBiTALK and Default settings check boxes are left UN-checked. This is why it is a good idea to back up your device's configuration (System Management -> Device Update -> Backup Configuration) and then import the config. to the device using the OBi Expert Import function.
Quote from: Dale on October 22, 2011, 07:53:10 PMI have noticed that most items have the little blue 'i' icon to provide additional information. Sadly however the content of the additional help is simply a repeat of the UI text. For example:Reset OBi Expert Config -> the help text says: Reset OBi Expert ConfigProviding a help link for us to hover over or click and then provide no additional content is actually worse than having no link! How about this: if you don't have help text don't display the 'info' icon.
Quote from: guyinsb on June 07, 2012, 12:01:34 PMI am using a MacBook running Snow Leopard, and use FireFox (v12.0).When attempting to use OBi Expert Configuration, when I uncheck the "OBiTalk" box,the other box does not get an automatic check. As a result, I can not uncheck bothboxes, and as a result can not change the value for the associated parameter.Everything works fine with Safari and Camino.[Mod note: A bug has been entered for this issue. Thank you for your support - Obihai Technology]