I put Pennytel on Gateway 2 and it seems like I am getting 404 errors.
Maybe I should start from scratch...
Here is what I am trying to do
For domestic calls/911 calls going out on SP 1.
For Calls to Australia I have them going to SP 2 since it not working on Gateway 3
Calls to Greece going out Gateway 4.
SP1
DigitMap (*9x|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<**2>01161xx.|<**4>01130xx.|xx.|(Mipd)|[^*]@@.)
SP2
Digitmap (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<**3>01161xx.|01130694xx.|01130697xx.|<**4>01130xx.|xx.|(Mipd)|[^*]@@.)
Phone port section
Digitmap ([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg3)|**4(Mvg4)|**6(Mvg6)|**7(Mvg7)|**8(Mli)|**9(Mpp)|(Mpli))
Outbound call section {911:sp1},{([1-9]x?*(Mpli)):pp},{(<#:>):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1}, {(<**2:>(Msp2)):sp2},{(<**3:>(Mvg3)):vg3},{(<**4:>(Mvg4)):vg4},{(<**6:>(Mvg6)):vg6},{(<**7:>(Mvg7)):vg7},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Primary Line is SP1 service