December 17, 2017, 11:22:13 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: 'Missed Call' on Line port  (Read 14764 times)
doctorjb
Newbie
*
Posts: 4


« on: January 09, 2013, 06:53:03 am »

Hi,

I've been using my Obi110 for about a month (GV on Phone1, Callcentric on Phone2 and my landline in Line). Everything is working to my satisfaction and I haven't played around with any of the advance settings. There is a slight annoyance that I was wondering if anyone could help me with: when an incoming call comes in to my landline, the handset attached to the Obi will ring (as it should). If the call is answered by a landline phone, the Obi handset will show 'Missed Call' (it is a Panasonic). I would prefer that I only received a 'Missed Call' notification if I truly missed a call coming in to either of the Phone ports - is there a setting that I can configure to control this.

Thanks in advance,

djb
Logged
azrobert
Hero Member & Beta Tester
*****
Posts: 3204


« Reply #1 on: January 09, 2013, 07:28:30 am »

I think the problem is with your Panasonic phone.  To verify this unplug the Panasonic  phone from the OBi and connect it directly to PSTN.  I bet you will get the same result.
Logged
doctorjb
Newbie
*
Posts: 4


« Reply #2 on: January 09, 2013, 08:15:33 am »

Ah, right you are. The only difference is if the handset is attached directly to the PSTN and another handset answers, the Panasonic shows a 'Line In Use' message and then switches to 'Missed Call' when the answering handset hangs up. OK, thanks for the input - I can live with this slight annoyance until I purchase another handset!

djb
Logged
Rick
Hero Member
*****
Posts: 1009


« Reply #3 on: January 09, 2013, 08:34:31 am »

I don't see it as a Panasonic issue.  I have a Panasonic phone plugged into my wall jacks as well as an ATT base.  WHICHEVER phone grabs the call results in the other phone showing "Missed Call".
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC