IP phone cant dial out

[jackndot]

I have the  obi202 device, and i have 2 analog phones and 1 ip phone Cisco spa303 everything i working ok  except

The IP phone cant dial out.., i can pick up incoming calls, but when i dial out from it i get invalid number

does anyone know what i need to change in the obiplus to make this work?

[QBZappy]

Should work.

OBiPLUS supports the use of Cisco SPA50xG and SPA303 IP phones as user extensions.
http://www.obihai.com/obiplus.html

Use Your OBi202 as a Google Voice™ Gateway for a SIP IP Phone
http://blog.obihai.com/2012/08/use-your-obi202-as-google-voice-gateway.html

[jackndot]

I figured it out by reading and reading and looking online
http://www.obitalk.com/obinet/pg/obiplus

That helped me. I didnt add an outbound trunk in the obiplus.,

once i did that i can dial outbound. i do have another issue if anyone knows this

HOW CAN I MAKE IT SO THAT I PRESS "THE DIAL PREFIX" AND ONLY ENTER 7 NUMBERS TO DIAL

as it stands now, i have to dial 1 xxx xxx xxxx or xxx xxx xxxx

[briandmiller]

Below is what I use for the dial map.

Just substitute your area code for the "zzz"

(<zzz>xxx xxxx|1 xxx xxx xxxx|011 xx.)

[lhm.]

Try this, will give 10 & 7 digit dialing.

(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>[2-9]xxxxxx|011xx.)

Replace aaa with your local area code.