June 20, 2018, 08:21:29 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Can't make changes to Obi202 in Obitalk portal, but can in web-portal  (Read 14792 times)
CanadianPete
Newbie
*
Posts: 3


« on: March 08, 2013, 06:51:09 am »

I am using my Obi202 in router mode. When I access the Obi202 from Obitalk's portal, I cannot make any changes to the device, and I see that my configurations that I have made to the device via my phone are not showing up here.

For example, in Obitalk's portal it does not show the my Obi202 is in "router mode" or that QoS is enabled. It it does not allow me to change these values here.

The weird thing is that when I access the Obi202 through its own IP address, I am able to see that the device is in router mode and that QoS is enabled. I am also able to make changes and see that the values that I have entered through my phone are registered as they should be.

So, what gives? I would rather use Obitalk's portal to configure the device than the device's IP address via webpage. Please help.
Logged
jwcmb
Jr. Member
**
Posts: 24


« Reply #1 on: March 08, 2013, 07:41:41 am »

Welcome to the forum!  This is probably the #1 thing about Obi device configuration that causes the most confusion.  It bedevils a lot of people!

I found the posts at the following links to be helpful in explaining the situation and showing the two options available to make configuration settings:

http://www.obitalk.com/forum/index.php?topic=4943.msg31954#msg31954
http://www.obitalk.com/forum/index.php?topic=4943.msg31948#msg31948
http://www.obitalk.com/forum/index.php?topic=4943.msg31953#msg31953

then refer to this:

http://www.obitalk.com/forum/index.php?topic=61.0

Logged
CanadianPete
Newbie
*
Posts: 3


« Reply #2 on: March 08, 2013, 07:54:00 am »

Your answer was excellent and solved my problem. Thanks!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC