Hello all. I got this amazing new obi ata and I got it to work with GV and standard phone in 3 min. I went and got this voip phone that is made by Yealink. I was trying to get this configured for the last 5 hours and I gave up. I tried every scenario and updated the firmware on my phone as well. I cant get this to work and I don't know what I am doing wrong. I did follow this link
http://blog.obihai.com/2012/08/use-your-obi202-as-google-voice-gateway.html but I could not get it to work. The link rerences to Cisco phone config and not the Yeahlink. If anyone can help me out? or give me some direction it would be amazing. I am going to post some of the info from the phone config. Thank you in advance for all the help and I really hope I can get this phone working soon
Firmware Version 7.70.0.140
Hardware Version 5.0.0.60
Serial Number Unknown
Register Status Register Fail
Account Active On Off
Label
Display Name
Register Name
User Name
Password
SIP Server Port
Backup SIP Server Port
Enable Outbound Proxy Server Disabled Enabled
Outbound Proxy Server Port
Transport UDP TCP TLS DNS-SRV
Backup Outbound Proxy Server Port
NAT Traversal Disabled STUN
STUN Server Port
Voice Mail
Proxy Require
Anonymous Call Off On
On Code
Off Code
Anonymous Call Rejection Off On
On Code
Off Code
Missed Call Log Disabled Enabled
Auto Answer Disabled Enabled
Ring Tone CommonRing1.wavRing2.wavRing3.wavRing4.wavRing5.wavRing6.wavRing7.wavRing8.wav
Network
Internet Port Type DHCP
IP Address 192.168.1.27
Subnet Mask 255.255.255.0
MAC Address 00-15-65-39-1A-EC
Link Status Connected
Router IP Address 0.0.0.0
Device Type Bridge
Router DHCP Disabled
Register Status
Account1
1001@500052991.pnn.obihai.com:5061 : Register Fail
Account2 Disabled
Account3 Disabled