News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Landline for locals and long dist via google simple setup

Started by peterman, April 05, 2011, 04:19:53 PM

Previous topic - Next topic

peterman

Hi everyone,

I just got my OBI110 and I would appreciate if someone can help me configure the following:
I have a land line (still) and I would like to use it for local calls and google voice for long distances (11 digits) and my voip for 011.


Local calls 7 digits : add area code 514 and dial using PSTN
10 Digits : dial using PSTN
911: dial via PSTN
011 *: (anything that starts with 011) dial via SP2 (my voip provider)
1xxxxxxxxxx (11 digits): via google voice (SP1)

Thanks in advanced.

RonR

Assuming the OBi is configured and working properly with SP1/ITSPA = Google Voice and SP2/ITSPB = VoIP, make the following changes:


Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service

Service Providers -> ITSP Profile A -> General -> DigitMap :

(1xxxxxxxxxx|<**81>[2-9]xxxxxxxxx|<**81514>xxxxxxxS4|<**2>011xx.|xx.|(Mipd)|[^*]@@.)



If these changes are made locally instead of through the OBiTALK configuration facility, also change:


System Management -> Auto Provisioning -> Auto Provisioning -> Method : Disabled



NOTE: The ITSPA DigitMap above adds a leading '1' to any 'area code + number' being sent to the PSTN.  If the '1' is not desired, change the two occurrences of '**81' to '**8'.