Can;t add second Google Voice account to sp2

[N7AS]

I have an OBi110 with firmware version 1.2.0 (Build: 2102).

On sp1 I have Google Voice configured as my primary. I used the wizard to add a seconf Google Voice account for sp2. It didn't work. The sp2 service status says that it's not connected.

I tried this again manually through the web portal with the same results after a reboot. It sems that the device is not saving any changes that I make.

How can I fix this?

[RonR]

If you use the OBiTALK configuration facility you MUST have Auto Provisioning in your OBi enabled and you MUST not make any changes locally/manually (or they'll get overwritten by OBiTALK).

If you want to make changes locally/manually, you MUST disable Auto Proviisioning in your OBi and you can no longer use the OBiTALK configuration facility at that point.

[N7AS]

For the wizard do I set the provisioning method to System Start or what?
I guess, if I want to do it manually, I set it to disabled?

[RonR]

For local/manual configuration of the OBi from your browser (to the IP address returned by dialing ***1 on the OBi phone):

System Management -> Auto Provisioning -> Auto Provisioning -> Method : Disabled

For OBiTALK:

System Management -> Auto Provisioning -> Auto Provisioning -> Method : Periodically

[N7AS]

I gave it a static IP as soon as I hooked it up.
Then I just disable the provisioning.
I will give it a try later as I am on a call right now that will last a good long while.