call filtering based on CID name from PSTN line on Obi110

[rob613]

In other threads I have discussed an innovative way I use my Obi110 to handle unwanted calls on my PSTN line and forward them on through a GV or SIP outbound gateway.   I am now getting a bunch of robo callers with nearly the same Caller ID Name but from a variety of numbers.   Is it possible to trigger a filter based on the Peer Name field?  How?

[squalk]

edit:

the first two paragraphs of this response might help
http://www.obitalk.com/forum/index.php?topic=6427.msg40709#msg40709

Not universal, but for Anveo, http://www.dslreports.com/forum/remark,28419533 will give you some ideas. E164 is a pre-loaded variable with the CID value, but it could be modified with the VARIABLE flow control.

CALLER.LOOKUP.CNAM is the variable that you could read and then maybe  write to that will go out as the name off the caller.

--


CNAM filtering might be better suited to the ITSP
http://www.obitalk.com/forum/index.php?topic=4200.msg27617#msg27617

http://www.anveo.com/api.asp?code=apihelp_cnam_lookup
http://anveo.info/wiki/doku.php?id=built_in_variables
http://www.broadbandreports.com/forum/r27450171-ANVEO-Inbound-CID-CNAM-Report

as

Only CID numbers can be processed by the OBi.

else these might interest


Syntax for InboundCallRoute
http://www.obitalk.com/forum/index.php?topic=4260.0

http://www.obitalk.com/forum/index.php?topic=2893.0