Conference calling with obi110???

[DataShuttle]

How to do it. If possible, where is the documentation?

Thanks

[Shale]

From http://www.obihai.com/OBiAdminGuide.htm

The OBi PHONE port supports Call Waiting when a 2nd call is an inbound call:

§  A Hook-Flash (or depressing the Flash button) invokes switching between two (2) calls.

§  When the OBi PHONE port goes On-Hook this will end current call and invoke a ring for the holding call.

The OBi PHONE port supports 3-way Calling when the second call is an outbound call.

On the first Hook-Flash during an active call the OBi can make a second outbound call.

On the second Hook-Flash, the first call and the second outbound call are placed in a conference.

To remove the second conferenced party, invoke a third Hook-Flash.

When the OBi goes On-Hook during a 3-way Call, this will become a transfer when 2nd (outbound) call is ringing or connected.  If the 2nd (outbound) call does not succeed, e.g. no answer or busy, then the OBi PHONE port can go to an On Hook state and will ring as the holding call is still on the line, or simply Hook-Flash to resume the first call.