BUG: Can not make codec G711A to be priority 1

[shap]

Hello,

Using expert settings in portal it is impossible to set a priority for the G711A codec (or any other codec) to 1 - after submit it returns to be previous value. The problem is only with priority 1. All other priorities (2-7) can be set ok.

[RonR]

Just in case you're not aware of it...

If you're comfortable making changes in OBi Expert, you most likely don't need OBi Expert.  It doesn't do anything you can't do yourself locally/manually to your OBi.  If you elect to configure your OBi locally/manually, you MUST disable Auto Provisioning or your changes will be overwritten by the OBiTALK configuration facility.

[shap]

I know that. I just found ObiTalk provisioning to be nice feature I definitely can workaround priority issue by setting codec priority in device itself.