I have been using the following setup for a few days now:
Netgear WNCE2001 connected to Internet port of Obi202 with ObiLine + ObiBT via Belkin USB 2.0 Hub
1 cordless attached to each of the 2 Phone ports
2 IP Phones (Snom320s) 1 attached to LAN of Obi202 and one attached via Powerline to LAN of the 1st Snom320.
I have setup the IP phones and Obi as described on
blog.obihai.com (besides for putting the Local IP in place of - EXT 1/Proxy =
500111101.pnn.obihai.com:5061)
I used all of the SPs 2 for each phone to give it 2 identities, 1 for ObiBT and 1 for ObiLine.
It has been working great until today I came home and nothing is working.
I can hardly access the Obi via the Static IP.
The cordless phones rarely have a dial tone and even when they do, they don't connect properly.
The *** IVR speaks very slowly...
The Snoms can't call out via either line, though they show as connected.
I'm at my wits end here.
Please help, someone?
Edit- more info: Obitalk is disabled and all provisioning is also.