December 16, 2017, 08:31:38 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: *67 does not block my callerid  (Read 10949 times)
cssobi
Newbie
*
Posts: 13


« on: December 10, 2013, 05:17:16 pm »

if I use my PSTN POTS line directly (not through any obi) when dialing a *67 + 11 digit number it blocks my callerid to the 11 digit number I called.

However through my obi110 (just after a factory reset) it does not block my caller id.
Shouldn't it block it? Or does one have to configure setting(s) in OBI110?
If so which one(s) or documentation explaining that?

« Last Edit: December 10, 2013, 05:19:44 pm by cssobi » Logged
N7AS
Sr. Member
****
Posts: 334



« Reply #1 on: December 10, 2013, 05:59:44 pm »

If you are calling using GoogleVoice, CID Call Block will not work.
GV does not allow blocking calls.
Logged

Grant N7AS
Prescott Valley, AZ
azrobert
Hero Member & Beta Tester
*****
Posts: 3203


« Reply #2 on: December 10, 2013, 07:26:27 pm »

Change Star Codes -> Star Code Profile A -> Code 5 To:
*67(<li(*67>1xxxxxxxxxx<)>), Block CallerId, call($Code)

Then dial *6714805551212 and *6714805551212 will be sent out the line port.

Edit:

This will work using a phone connected to the Phone Port.
Are you trying to do this from Asterisk?
« Last Edit: December 10, 2013, 07:36:48 pm by azrobert » Logged
cssobi
Newbie
*
Posts: 13


« Reply #3 on: December 10, 2013, 07:50:39 pm »

>This will work using a phone connected to the Phone Port.
>Are you trying to do this from Asterisk?
Yes want to do from asterisk and have 3 to as many  5 OBI202s that we want to route the call through asterisk to the OBI110:LI port and support such codes: *67 (block) but another effort need to support *82 (unblock), those are just 2 but may need to support more.

right now we are routing all 11 digit numbers through asterisk back through obi110:LI port .... just need to get these "prefix codes" supported/working
« Last Edit: December 10, 2013, 07:56:59 pm by cssobi » Logged
giqcass
Hero Member & Beta Tester
*****
Posts: 1439


« Reply #4 on: December 10, 2013, 08:41:58 pm »

I'm not an asterisk expert but I think you just need to disable the *codes on the Obi that relate to the functions you want to use on asterisk.  
« Last Edit: December 10, 2013, 08:45:30 pm by giqcass » Logged

Register at e164.org and friends can use Sipbroker to call you from a regular telephone for free from almost any country.
DDNS hack for OBi
Old OBi? Want Ring.to?
azrobert
Hero Member & Beta Tester
*****
Posts: 3203


« Reply #5 on: December 10, 2013, 09:26:30 pm »

All OBi's

Change Star Codes -> Star Code Profile A ->
Code 4 To:
*82(<sp1(*82>1xxxxxxxxxx<)>|<sp1(*82>xxxxxxx<)>), Block CallerId, call($Code)
Code 5 To:
*67(<sp1(*67>1xxxxxxxxxx<)>|<sp1(*67>xxxxxxx<)>), Block CallerId, call($Code)

OBi202s

Change Star Codes -> Star Code Profile B ->
Code4 To:
*82(<sp2(*82>1xxxxxxxxxx<)>|<sp2(*82>xxxxxxx<)>), Block CallerId, call($Code)
Code 5 To:
*67(<sp2(*67>1xxxxxxxxxx<)>|<sp2(*67>xxxxxxx<)>), Block CallerId, call($Code)

I don't have an OBi202, so make sure Phone Port 2 points to StarCode Profile B.
I included rules for 7 digit dialing.

OBi110

SP1 service X_InboundCallRoute:
{robert1>((Msp1)|911|*671xxxxxxxxxx|*821xxxxxxxxxx|*67xxxxxxx|*82xxxxxxx):li},{ph}

If you are following my suggestion for your Asterisk setup you can NOT include the *67 and *82 rules in the SP1 DigitMap.

See the following for an explanation of Star Codes:
http://www.obitalk.com/forum/index.php?topic=6740.0

I tested the Star Codes, but not the inbound call route.

Edit:
I fixed a typo in one of the Star Code rules.

« Last Edit: December 10, 2013, 10:12:48 pm by azrobert » Logged
Gunaski
Newbie
*
Posts: 2


« Reply #6 on: March 12, 2014, 03:01:06 pm »

hi
tried the above setting on obi202 to block callerid, getting message 'the number you dialed was rejected by the service provider reason 404. Using Asterisk and DID from VOIP.ms

Thanks in advance
« Last Edit: March 20, 2014, 08:23:38 am by Gunaski » Logged
SeanC
Newbie
*
Posts: 7


« Reply #7 on: November 30, 2014, 11:23:09 pm »

Worked great for me; minor edits to include both 10 digit dialing with or without the "1" prefix and had to include the other star codes for forwarding;  my Star Codes are configured as follows:

Code2:
*81(<sp1(*82>1xxxxxxxxxx<)>|<sp1(*82>xxxxxxxxxx<)>|<sp1(*82>xxxxxxx<)>), Block CallerId, call($Code)

Code3:
*82(<sp1(*82>1xxxxxxxxxx<)>|<sp1(*82>xxxxxxxxxx<)>|<sp1(*82>xxxxxxx<)>), Unblock CallerId, call($Code)

Code4:
*67(<sp1(*67>1xxxxxxxxxx<)>|<sp1(*67>xxxxxxxxxx<)>|<sp1(*67>xxxxxxx<)>), Block CallerId Once, call($Code)

Code5:
*68(<sp1(*67>1xxxxxxxxxx<)>|<sp1(*67>xxxxxxxxxx<)>|<sp1(*67>xxxxxxx<)>), Unblock CallerId Once, call($Code)
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC