Softphone set up with X-Lite or other client - No Audio Out only Audio In

[rajp]

Hi, I am facing weird problem. I installed OBIApp and X-Lite client on my windows desktop. I configure everything correctly. I am successfully getting call from softphone as well as calling on my softphone. On my desktop, I am able to hear Audio but Audio is not going out. So incoming Audio works, out going Audio is not working. Microphone setting is working correctly. I tried three different client. I used phoner, x-lite and 3cx. All has same problem. Incoming Audio works, outgoing is not. Please let me know, if you know any tricks. I know I am missing some small configuration but don't know what.

Thanks,
Raj

[rajp]

I debug log messages and I can see that I do have incoming data packets coming to my OBI202.

Here is the Call status Log:

Number of Active Calls: 1


Call 1           


Terminal 1 Terminal 2
Terminal ID OBiTALK1 GoogleVoice1
State connected connected
Peer Name   
Peer Number XXXXX; GW=XXXXXXX XXXXXXXX
Start Time 19:01:58 19:01:58
Duration 00:00:12 00:00:18
Direction Inbound Outbound
Peer RTP Address XX.XX.XX6.171:24660 173.194.68.127:19305(relay)
Local RTP Address XX.XX.XX.X:51580 XX.XX.XX.5:17554
RTP Transport UDP UDP
Audio Codec tx=G711U; rx=G711U (bridged) tx=G711U; rx=G711U (bridged)
RTP Packetization (ms) tx=20; rx=0 (bridged) tx=20; rx=20 (bridged)
RTP Packet Count tx=623; rx=0 tx=0; rx=639
RTP Byte Count tx=107156; rx=0 tx=0; rx=109908

[rajp]

I set up static IP Address on my OBI202, So all ports are open. Still I have same problem. User who use softphone can hear incoming voice but softphone user talk not able to hear other user, who is not using softphone(e.g. cell phone caller).

Thanks,
Raj