Hey all, I went through the trouble of getting my OBi110 working with this particular voicent autodialer, (
http://voicent.com/autodialers.php) that I purchased and I didn't see anything here on how to do that so I thought I would share the process on how to do it.
You will need an account on OBiTalk (of course) and a SIP provider. Personally, I used CallCentric, which obi specifically supports. You can follow OBI's tutorials (
http://www.obihai.com/tutorials-tips) on getting connected initially and entering your SIP information.
To start, I was following this setup page:
http://voicent.com/sip/setup-cisco-spa3102-for-voicent.php But the Obi doesn't quite setup the same way as the SPA.
To make it work with Voicent software, you have to enter in SIP information in the Gateway. You do need to download the OBiON app and have it running, which OBiHai also has some documentation on:
http://www.obihai.com/faqOnce you get all that set up, you need to enter in the Obi information into Voicent's software. This took me a bit but I eventually figured out it's similar to setting up X-lite, you just open up the Gateway, go to options, then go to the SIP tab that pops up to enter in new SIP information.
For SIP ID you just put in the OBi110 id number. For Domain put in 127.0.0.1
Check Register with domain to receive incoming calls and set the proxy to also be 127.0.0.1
After that you should be all set to run calls through the obi110.
