News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Can't find Call History under Expert Config: Obi110 or Obi200

Started by DianaNathan, January 24, 2014, 06:11:46 AM

Previous topic - Next topic

MikeHObi

It's not tracked on obi-talk.  It is available via the admin interface from the obi's internal web server.  I wish it was available on obi-talk.
Obi202 user & Obi100 using Anveo and Callcentric.

DianaNathan


gderf

Help me OBiHai PhoneOBi. You're my only hope.

drgeoff


MikeHObi

Quote from: drgeoff on January 24, 2014, 11:36:17 AM
Username is admin.  Default password is admin.

Password for the webpage has been added to ObiTalk.  So username is admin, but password may be the password you setup in ObiTalk when you configured your device.
Obi202 user & Obi100 using Anveo and Callcentric.

DianaNathan

I was able to access the Call History.

Thank you, all, for your assistance.

WM94

Quote from: gderf on January 24, 2014, 08:20:06 AM
http://your.obi.ip.address

I tried this last night, but was not able to connect. My computer is setup to the router wirelessly, and the Obi202 is wired. Will both need to be wired for this connection? Can OpenDNS mess things up?

MikeHObi

Quote from: WM94 on February 20, 2014, 06:48:07 AM
Quote from: gderf on January 24, 2014, 08:20:06 AM
http://your.obi.ip.address

I tried this last night, but was not able to connect. My computer is setup to the router wirelessly, and the Obi202 is wired. Will both need to be wired for this connection? Can OpenDNS mess things up?

By default the OBI does not expose the web admin page on the internet connection.  You may need to change that configuration (make sure you then use a strong password) to have it available to your computer.
Obi202 user & Obi100 using Anveo and Callcentric.

WM94

Quote from: MikeHObi on February 20, 2014, 09:20:47 AM
By default the OBI does not expose the web admin page on the internet connection.  You may need to change that configuration (make sure you then use a strong password) to have it available to your computer.

Is that also setup through the handset? I dialed ***0, 30#, 1, 1#, 1. I thought that enabled web config. I found this http://www.obihai.com/faq/OBi202-sec/Howto-Access-Web-from-WAN, and followed the directions at the bottom of the page using ObiTalk. Even though I did the dial access, AccessFromWAN was disabled. Now that it is enabled (with stronger password), I will try it again tonight.