If POTS, then calls can be initiated via PhonePower's webPortal
with a click of a button
and as long as you signed up with your
GV# (to be spoofed) you can actually use ANY phone to call out
and your GV# will show -- from your home: Click2Call...
You can be at your friend's house or about and initiate a call via PP's
webPortal and your GV# will show => feature: Remote Click2Call.
Note: with POTS & Click2Call you are billed 2 outgoing (if you have
unlimited, this is free, but with unlimited you have 5000 min/mo)
If VOIP, then calls can be initiated directly from your house phone
as long as your VOIP provider allows you to spoof your GV#.
In either case, your will forward your GV# to your house phone#,
increase the rings (if you want), and make sure GV voicemail does
not answer the calls if no answer (unless you want it to do so).
You could POSSIBLY end up with messages at both GV & your VOIP
if your rings counts are close & voicemail is active for both locations.
Service providers Anveo, PhonePower, VestaLink (in alphabetical order),
but there are other providers available that provide outbound spoofing.
ALL of these can be found under your Obi's Device Management page
once you are signed in:
http://www.obitalk.com/obinet/pg/obhdev