News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Reboot Reason Code

Started by dvijen, January 29, 2011, 02:20:35 PM

Previous topic - Next topic

dvijen

What is Reboot Reason Code 9?  I have got it twice since yesterday.  The available codes in the admin guide are

Reboot Reason Codes:
0: Reboot on Power Cycle
1: Operating System Reboot
2: Reboot after Firmware Update
3: Reboot after New Profile Invoked
4: Reboot from Webpage
6: New Profile Invoked AND Profile URL Changed
8: Reboot from Telephone Port (IVR)
10: Reboot During OBiTALK Signup
11: Reboot During OBiTALK Signup
12: Reboot on Data Networking Link Re-establishment

code 9 seems to be missing.

Dvijen

dvijen


ShermanObi

9: Reboot the unit from the OBi device's web page, e.g select the "Reboot" button.

dvijen

#3
Thanks

hamlinpark

All the codes now appear to be included in the Admin guide:

Reboot Reason Codes
0: Reboot on Power Cycle
1: Operating System Reboot
2: Reboot after Firmware Update via provisioning or phone (***6)
3: Reboot after New Profile Invoked
4: Reboot after Parameter Value Change or Firmware has changed and invoked via device web page
5: Reboot after Factory Reset using the OBi device hardware pin
6: New Profile Invoked AND Profile URL Changed
7: Reboot from SIP Notify (Reserved)
8: Reboot from Telephone Port (IVR)
9: Reboot from Webpage - No change in parameter value(s) or firmware
10: Reboot During OBiTALK Signup
11: Reboot During OBiTALK Signup
12: Reboot after DHCP server offers IP, GW-IP and/or Netmask different from what the OBi device is currently using
13: Reboot on Data Networking Link Re-establishment
18: Reboot on WAN IP address change (OBi202/OBi302 only)
19: Reboot on LAN IP address change (OBi202/OBi302only)

MrHomestead

My Obi202 rebooted about 3.75 hours ago - with a code 24?  Any clue what reason #24 indicates?

GPz1100

Where do you see a reboot code?

drgeoff

Quote from: GPz1100 on April 24, 2018, 10:41:16 PM
Where do you see a reboot code?
The same line that shows the Uptime on the Status page.