Stay current with up-to-date firmware and keep your OBi running smoothly with the latest features.NOTICE TO SERVICE PROVIDERS AND SYSTEM INTEGRATORS: The firmware versions below are only for use by OBiTALK retail/BYOD customers. For the latest firmware and release notes targeted to service providers and system integrators, please sign-in to your OBiTALK Device Management Platform (DMP) account, then head over to the Firmware section on the portal.You have three options to choose from to update your OBi's firmware:Options 1 & 2 - Automated Update:1. Devices that have been added to OBiTALK will see an associated yellow triangle
which can be selected to invoke an automated update process.
2. Devices may be updated via the touch-tone phone attached to the OBi or the IP phone dial pad. Dial
*** 6 and confirm the update (if available).
Option 3 - Manual Update:3. Download the latest firmware for your device from the link below and follow the instructions to manually update your OBi using a web browser opened to the OBi device's local management web page.
 |
OBi2 & OBi3 Series Universal Adapters:
OBi200/202/300/302: OBi200/202/300/302
3-2-2-8680EX
Last Update July 2021 |
 |
OBi5vs Series Universal Adapters:
OBi504/508: OBi 5vs Firmware
4-0-5-5980
Last Update December 2018 |
 |
OBi1000 Series IP Phones:
OBi1022/OBi1032/1062: OBi1000 Firmware
5-1-11-5312EX
Last Update July 2021 |
OBi2000 Series IP Phones: OBi2062/OBi2162/OBi2182:
OBi2000 Firmware 6-2-3-5330
Last Update July 2021
Manual Update Instructions:
1. Download the above linked file to your computer.
2. Access the web page of the OBi device (OBi via Internet/WAN Port):
- From a phone attached to the PHONE port of the OBi dial * * * 1
- The IP address of the OBi will be read to you
- Open a new browser window on your PC and enter the IP address of the OBi.
E.g. 192.168.1.110 - When prompted, enter "admin" for username and "admin" for password.
If you have previously changed the password, use that instead of "admin." - OBi202/OBi302 Note: To access the OBi via the LAN port, by default the LAN port IP (Gateway) address is: 192.168.10.1
- OBi202/OBi302 Note: To access the integral web page via the WAN port, you may need to enable WAN access. To do this, from the connected phone dial ***0. Next, enter 30# - Press 1 to enter a new value - Press 1# to enable - Press 1 to save.
3. Now that you have accessed the OBi web page, go to the "System Management" - "Device Update" page. From there, "Browse" to the firmware file you just downloaded above and click Update.
4. Wait for the OBi to restart (approx. 30-60 seconds) and you will be good to go.
Additional information can be found at this Poly KB Article.
