OBi110 Brasil Tones

[Tobias_Tromm]

Hi.

Can someone help to convert these Grandstream Brasil tones to Obi110 standard?

Thank You!

[azrobert]

This is my first time modifying tone settings. Hopefully I got these correct. I don't see where the Disconnect tone is defined on the OBi110.

Tone Settings -> Tone Profile A

Dial Tone 425-10;20

Ringback Tone 425-10;-1;(1+4)

Busy Tone 425-10;10;(.25+.25)

Reorder Tone 425-10;10;(.25+.25)

[Tobias_Tromm]

Hi.

The Disconnect tone are located at Physical Interfaces -> LINE Port -> PSTN Disconnect Detection -> DisconnectTonePattern.

Can you help me with these too?

Thanks.

[azrobert]

Disconnect Tone 425-10;10;(.25+.25)

Same as Reorder

[Tobias_Tromm]

Thats true.

I will test and report back.

Thanks!

[azrobert]

This is what I did:
I changed the frequency to 425-10.
The OBi110 has a combination of 2 frequencies.
Your example has the 2nd frequency as zero.
I assume this means it's no used, so I didn't include a 2nd.
Your example doesn't include a tone duration, so I keep them at default.
Dial at 20 seconds. Busy and Reorder at 10 seconds.
-1 for Ringback means ring forever.
I changed the cadence as specified in example.

[Tobias_Tromm]

Hi again.

I am experiencing some calls get disconnect when user is talking (using PSTN call to make the call).

The call is terminated without reason.

Can some tone be wrong or how can I debug?