You are correct, I meant Voice Services.
I corrected my post.
Do you use the local interface or OBiTalk to configure your OBi's?
If you use the local interface to configure your OBi you must disable OBiTalk auto provisioning, otherwise OBiTalk will overlay any changes you make.
System Management -> Auto Provisioning
Under OBiTalk Provisioning
Method: Disabled
If that is not the case, please post the call history for both OBi's.
To access Call History:
Log directly into the OBi using the local interface.
Key the IP address of the OBi into a Web Browser.
Hit Enter
The UserID and default Password are both "admin".
Click Status on the left column.
Then click Call History.
Alter the OBi numbers for security reasons.
You need a prefix for the dialed number to route outbound calls to the OBi110/PSTN.
I use "9", the default for the OBi110 is "**8".
You can use anything you want as long as it doesn't conflict with other dialed numbers.
If you are routing only 7, 10 digits or unique area codes then you don't need a prefix.
What do you want to do?
Also list the format of all the numbers you want routed, like listed above