March 20, 2018, 11:49:10 pm *
Welcome, Guest. Please login or register.
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
Author Topic: Obitalk Obi Expert Configuration vs IP address  (Read 1632 times)
Jr. Member
Posts: 39

« on: May 05, 2015, 09:28:28 pm »

I am quite puzzled sometime when I changed the configuration through Obitalk Obi Expert Configuration the information does not get updated when I logged in directly to OBi through IP address.

I though I can use any of those two method to configure OBi200.

Sr. Member
Posts: 334

« Reply #1 on: May 05, 2015, 10:02:17 pm »

You have to decide which method you prefer to use. You can't use both as any change you do locally will be overwritten by ObiTalk.

To do configuration locally go to:

System Management > Auto Provisioning > Auto Firmware Update > Method: Disabled
System Management > Auto Provisioning > ITSP Provisioning > Method: Disabled
System Management > Auto Provisioning > ObiTalk Provisioning > Method: Disabled


Grant N7AS
Prescott Valley, AZ
Pages: [1]
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC