Thank you jentzd. I have put the info in from your configuration suggestion into my OBI. (192.168.1.5) not OBI web portal (expert). After i did what jentzd suggested, It started 2 times and came back a little different from jentzd configuration. Here are the differences.
In the Service Providers section:
Under ITSP Profile x General:
Digitmap=(*xx|1xxxxxxxxxx|<1540>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)
Could be just my setup? Under ITSP Profile x SIP:
RegistrarServer = (blank)
RegistrarServerPort = 5060
RegistrationPeriod = 60
All other info stayed the same as jentzd info.
Thank you, My OBI now works again, at least for the last 2 hours. YEA!!
Re: Is PhonePower still an approved service provider?
« Reply #19 on: November 11, 2017, 12:59:38 pm »
Turns out it wasn't just the 3600 in registration period (that was my guess). A few more settings are needed that I would have never guessed.
In the Service Providers section:
Under ITSP Profile x General:
1) Name = PhonePower
2) DTMFMethod = Auto
3) X_UseFixedDurationRFC2833DTMF = not checked
4) DigitMap = (**|[3469]11|0|00|1xxxxxxxxxx|<1>[2-9]xxxxxxxxxS0|*21|*50xxxx|*51xxxx|*52xxxx|*53xxxx|*54|*6[013569]|*6[27]xx.|*77|*[789]2xx.|*73|*74[0-1][0-9]*xxxxxxxxxx|*75[0-1][0-9]|*8[137]|90xxxx|*93|*96|011xx.|xx.|(Mipd)|[^*#]@@.)
Under ITSP Profile x SIP:
ProxyServer =
sip.phonepower.com ProxyServerPort = 0
RegistrarServer =
sip.phonepower.com RegistrarServerPort = 12060
UserAgentDomain =
sip.phonepower.com OutboundProxy =
sip.phonepower.com OutboundProxyPort = 0
RegistrationPeriod = 3600
X_RegistrationMargin = 0.1
In the Voice Services section:
Under SPx Service:
Enable = checked
X_AcceptSipFromRegistrarOnly = checked
X_NoRegNoCall = checked
X_KeepAliveEnable = checked
X_KeepAliveExpires = 30
X_KeepAliveServer =
sip.phonepower.com DirectoryNumber = (your phone number)
AuthUserName = (your phone number)
AuthPassword = (your sip password)
So, now that the ASP method is gone, I was selecting the list of service providers and selecting phone power. The tech told me not to do that. Essentially you can select generic service provider, fill in a few items from this list, but then go into expert mode and fill in the rest of the items. Not easy!!
But at least there is a way forward.
Also the tech said SPs still in ASP registered mode will eventually stop working Sad I did not ask about the concurrent calls issue, since we will be going from 4 to 2, but I will - eventually.. unless someone beats me to it.