Print Page - Possible to use OBi110 to as an FXO port on a 3CX server?

Title: Possible to use OBi110 to as an FXO port on a 3CX server?
Post by: DuhTrev on June 09, 2011, 05:00:17 PM

I've seen the various posts/threads regarding setting up the Obi110 as an FXO port for an Asterisk/FreePBX setup. However, I have not seen anything regarding getting the OBi110 to work with 3CX. Does anyone know if this is even possible? I have been trying to get it to work for the better part of a day with little luck so far. I can get 3CX to pick up an incoming call, but then nothing happens, and it will not even recognize an outgoing call.

Thanks

Title: Re: Possible to use OBi110 to as an FXO port on a 3CX server?
Post by: yhfung on June 10, 2011, 04:49:45 PM

Are you able to set up SIP phones on your 3CX server such that they are able to have voice communication between them without any problem encountered?

YH

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: DuhTrev on June 09, 2011, 05:00:17 PM