OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: cannonstone on July 16, 2015, 06:11:53 PM

Title: Ob100 to apple airport
Post by: cannonstone on July 16, 2015, 06:11:53 PM
Hello,
  It had been working good for about 8 months(still under warranty). I'm using google voice. Power light is blinking green, I've tried every fix I could find on-line, but can't get the light to go to steady. Any help is greatly appreciated. Steps I've tried so far.

!. Factory reset
2. Changed out Either cable
3. Tried map porting on the Apple Airport
4. Reset modem & router
Title: Re: Ob100 to apple airport
Post by: drgeoff on July 17, 2015, 08:19:56 AM
Power LED blinking green means the OBi is not getting an IP address.

As a test try bypassing the Airport. Reboot the OBi after connecting its ethernet cable to whatever was feeding the Airport. 
Title: Re: Ob100 to apple airport
Post by: okcomputer on July 18, 2015, 02:12:30 PM
How about changing the port you have the obi connected to, just for the sake of ruling out that rare possibility you've got a bad port?