I was having some issues with connectivity to the local network and chose to do a factory reset.
I now able back able to access the local webpage of the Obi110.
I was hoping that it might have re-downloaded my web config but it hasn't. I have tried to 'add device' but it won't work - probably because the device with the same hardware ID, and the configuration I wish to use is already listed.
How can I re-link this?
Thanks
Try enabling OBiTalk Auto Provisioning.
Log directly into the OBi using the local interface.
Key the IP address of the OBi into a Web Browser.
Hit Enter
The UserID and default Password are both "admin".
Provisioning is found here:
System Management -> Auto Provisioning
Under OBiTalk Provisioning change
Method: System Start
If this works then change the Method to: Periodically
Periodically is the default after you add a device to OBiTalk.
Fantastic, that did the trick. Thanks!