Text only | Text with Images

OBiTALK Community

General Support => Day-to-Day Use => Topic started by: lrosenman on January 18, 2016, 05:29:03 PM

Title: Adding a prefix to an inbound CNAM?
Post by: lrosenman on January 18, 2016, 05:29:03 PM
On my asterisk/freepbx system, I can add a caller-id prefix depending on what inbound route stuff came in.

Is there any way to do that with the SP's on my Obi? (GV especially), but SIP as well
Title: Re: Adding a prefix to an inbound CNAM?
Post by: Lavarock7 on January 19, 2016, 12:33:34 PM
If using Voip.Ms, you can add some alpha-numeric stuff on the DID. That item is called "CallerID Name Prefix (Optional)". However this is before Voip.Ms sends to your Obi.
Title: Re: Adding a prefix to an inbound CNAM?
Post by: lrosenman on January 19, 2016, 12:35:38 PM
I can do it if I route stuff through the Asterisk box.  I'm looking to do this on the Obi.....
Title: Re: Adding a prefix to an inbound CNAM?
Post by: azrobert on January 19, 2016, 01:20:53 PM
X_InboundCallRoute:
{(<A>@.):ph}

Some phones will not display an alpha-numeric callerid.
Title: Re: Adding a prefix to an inbound CNAM?
Post by: lrosenman on January 19, 2016, 01:23:28 PM
I'm looking to prefix whatever CNAM (Caller-ID Name) comes from the Provider.

I.E. if the CallerIDNAME from the provider is "Larry Rosenman" what I want the OBI to send to the phone is:
"LER: Larry Rosenman"

with the full 10-digit Caller-ID NUMBER
Text only | Text with Images