Print Page - Cannot edit Expert Configuration items in obitalk?

Title: Cannot edit Expert Configuration items in obitalk?
Post by: pointpeninsula on March 23, 2016, 11:34:06 AM

Hi,

I've had an OBI 110 for a few years, and it's been working fine, but today it cannot register with the server (anveo).

According to Aveeo, the ITSP Profile A SIP should have the ProxyServer and ProxyServerPort fields modified. However, I cannot edit these fields. I know that in the past I was able to modify X_InboundCallRoute, so this is apparently new behavior.

Anyone seeing a problem like this or have an idea of what's wrong?

tia,

Tom

Title: Re: Cannot edit Expert Configuration items in obitalk?
Post by: drgeoff on March 23, 2016, 02:18:52 PM

You need to have no ticks in the two boxes at the right hand side of the lines you want to change.

Title: Re: Cannot edit Expert Configuration items in obitalk?
Post by: pointpeninsula on March 25, 2016, 11:59:09 AM

Thanks for the reply. I did figure that out after some fooling around in the UI. I meant to update my post, and ran out of time.

Tom

OBiTALK Community

General Support => Installation and Set-Up (Devices) => Topic started by: pointpeninsula on March 23, 2016, 11:34:06 AM